Acoustic panels can be easily installed in almost any room and offer a significant sound reduction benefit. Furthermore, they have a beautiful appearance, making them a perfect alternative to traditional wallpaper or wall paint.

This depends entirely on the size of your room, the number of other pieces of furniture, and even the height of your ceiling.

The width of our acoustic panels is 60 cm or 50 cm, depending on the series.

We offer up to three different lengths, depending on the collection.
120cm
240cm
300cm

All our real wood variants are untreated.

The slats are 27mm or 38mm wide. The spacing between the slats is approximately 13mm for panels with 27mm slats.

End strips can be used to create a solid wood look at the end of a panel. The strip conceals the felt on the sides.

We do not offer a custom cutting service.

The panels are easy to maintain. A few times a year, wiping with a slightly damp cloth is sufficient. For wood panels, we recommend maintenance oils.

Depending on the type of wood, 500ml of care oil is sufficient for approx. 6-8 panels.
We recommend only oiling the surface of the individual slats; it is difficult to spread the oil evenly on the sides without it getting onto the felt.

Our panels are intended for indoor use (living spaces) only.

We do not recommend installation in conservatories, camping vans or similar rooms, as the sunlight can cause particular stress here, for which our panels are neither tested nor approved.

Your order will be packed in our warehouse within the time specified on the product page. You will receive an email as soon as your order is packed. Delivery will then take 1-2 business days.

Shipping costs are calculated individually based on the order quantity. You can view the shipping costs in your shopping cart after entering your zip code.

We ship our acoustic panels with Der Kurier, smaller packages and accessories with GLS.

As soon as your order leaves our warehouse, you will receive an email from the shipping company with a tracking link. Please note that it may take up to 48 hours for the shipment to be scanned and the link to be activated.

Orders of 12-15 panels or less will be shipped in a carton. All orders with larger quantities will be shipped on pallets. (For orders weighing 100 kg or more, see below.)

If your order is damaged, please send us an email as soon as possible with information and pictures of the damage. Our complaints department will then process your case as quickly as possible.

A substructure is not absolutely necessary.

To achieve an even better acoustic effect, we recommend mounting the panels on a substructure including insulation material.

It depends on where the panels are mounted.

For wall mounting, we recommend 15 screws per panel (20 for mounting on a plaster wall).

For ceiling mounting, 20-25 screws should be used per panel.

Yes, the panels can easily be sawn to the desired size.

The easiest way to do this is with a circular saw, but it is also possible with a jigsaw, hacksaw or Japanese saw.

Important NOTE:

For a table saw, felt facing down and slats facing up; for a Japanese saw, foxtail saw or jigsaw, always place the felt facing up.

We always recommend checking with a professional to see if the saw you plan to use is suitable for cutting the slats with the finish you have ordered.

Sure! Installation is child's play and no problem even for amateurs.

Yes, it is very easy to do and works great with a utility knife, for example.

We cannot recommend use in damp rooms, but you are the best person to judge whether installation without direct contact with water is possible.
You may also have good ventilation in your bathroom. However, in this case, we recommend applying a water-repellent coating to the slats.